• New
CABLE GLANDS WM WITH ADAPTER
search
  • CABLE GLANDS WM WITH ADAPTER

CABLE GLANDS WM WITH ADAPTER

Cable glands are electrical devices that are used to protect electrical cables in explosion-prone areas. These glands contain special materials that prevent the spread of sparks and electrical arcs, which could cause an explosion. Cable inlets for hazardous areas are mainly used in the chemical, refining, petroleum and other industries where there is a risk of explosion due to the presence of flammable gases, liquids or dust.

I M2 Ex eb I Mb

II 2G Ex eb IIC Gb

II 2D Ex tb IIIC Db

 

Ask for the product

WM…m  type  cable  glands  (equipped  with  an  additional  cable  clamp)  are  designed  for feeding  cables  and  power  cables  into  flameproof  or  reinforced  enclosures  in  Group  I  and  II explosion-proof  electrical  equipment,  or  into  dust-tight  enclosures  in  the  case  of  Group  III equipment. The AP.. adapter allows the mounting of the WM.. cable gland to be changed from threaded to a flat flange, mounted from the inside or outside of the device enclosure. WM with adapter is the perfect solution for Gothe junction boxes.

Application:

Ex installations above and below earth, equipment group I & II

Design:

robust, with adapter and heavy strain-relief clamp

Adapter design:

with 6 mounting holes and O-ring

Sizes:

M60 to M80 (bigger sizes like M90 – M120 in progress)

Sealing range:

ø 39 – 100 mm

Protection class:

IP 66

Ambient temperature:

-50 °C to +90 °C

Operating temperature:

-50 °C to +125 °C

Material cable gland:

cast steel

Material sealing:

CMP

Surface treatment:

Special painting

Humidity:

100% with 35°C

Corrosion resistance:

CI-5 (PN-EN ISO 12944-2)

Explosion protection:

I M2 Ex eb I Mb

II 2G Ex eb IIC Gb

II 2D Ex tb IIIC Db

Certificates:

ATEX

Standards:

PN-EN IEC 60079-0:2018, equivalent to IEC 60079-0:2017

PN-EN 60079-7:2016, equivalent to IEC 60079-1:2015

PN-EN 60079-31:2014, equivalent to IEC 60079-31:2014
CG